 |
|
 |
Special
Shopping Cart
Your Cart is currently empty.
|
ID1000
For more detailed information on the Injector Dynamics 1000cc injectors, CLICK HERE.
If your application is not currently listed in our guide, you can still find the right fit by cross-referencing your current injector dimensions with the Injector Dynamics dimensions below:
 ID1000 Injector (48mm x 11mm)
|
Price:
$120.00
|
|
|
Product Code: 1000.48.11
Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR
Injector Dimensions:
- length: 48mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 11mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (US Car) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
ID1000 Injector (48mm x 14mm)
|
Price:
$118.00
|
|
|
Product Code: 1000.48.14
Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR
Injector Dimensions:
- length: 48mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 14mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (US Car) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
ID1000 Injector (60mm x 11mm)
|
Price:
$120.00
|
|
|
Product Code: 1000.60.11
Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR
Injector Dimensions:
- length: 60mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 11mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (US Car) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
ID1000 Injector (60mm x 14mm)
|
Price:
$120.00
|
|
|
Product Code: 1000.60.14
Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 7.0 Bar (101.5 psi)
Fuel Compatibility - Compatible With All Known Fuels
Electrical Connector - USCAR
Injector Dimensions:
- length: 60mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 14mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (US Car) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
Results 1 - 4 of 4
Last Updated: Sunday, 19 May 2013 18:40
|
|
|
|
    |
|
Products 
Audi 
