Injector Dynamics 725cc high impedance fuel injector set forAudi A4 2.0t (non-direct injected) engines. Set of 4
Set of 4
The new Injector Dynamics 725cc saturated fuel injectors are now available for the Audi 2.0 turbo non-direct injection engines. These injectors fit the 2.0t, use 14mm adaptors, no injector resistors, and include pigtails for an easy splice in installation.
With pressure capability in excess of 8 bar this injector has found a home in many different applications.
The ID725 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for even the smallest engines. This makes the ID725 ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors.
If you're unsure if these will work in your application, give us a call and we'll help you figure out what it will take
These have a droplet size comparable to a 600cc Siemens injector and a much better spray pattern and atomization than any other injector on the market.
The proper battery comp values are also provided with each set so you can set it up in your computer and have consistent a/f ratios as battery voltage fluctuates. Most other injectors don't offer that information at anything other than 1 voltage level.
Plug-and-Play adaptors are available!!
Nominal Dynamic Flow Rate - 725cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F) Maximum Differential Fuel Pressure - 8.5 Bar (123.5 psi) Fuel Compatibility - Compatible With All Known Fuels Electrical Connector - USCAR