 |
|
 |
Special
Shopping Cart
Your Cart is currently empty.
|
Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
ID2000
For more detailed information on the Injector Dynamics 2000cc injectors, CLICK HERE.
If your application is not currently listed in our guide, you can still find the right fit by cross-referencing your current injector dimensions with the Injector Dynamics dimensions below:
 ID2000 injector (48mm x 11mm)
|
Price:
$240.00
|
|
|
Product Code: 2000.48.11
Injector Dimensions:
- length: 48mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 11mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (Denso Female) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
ID2000 injector (48mm x 14mm)
|
Price:
$240.00
|
|
|
Product Code: 2000.48.14
Injector Dimensions:
- length: 48mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 14mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (Denso Female) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
ID2000 injector (60mm x 11mm)
|
Price:
$240.00
|
|
|
Product Code: 2000.60.11
Injector Dimensions:
- length: 60mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 11mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (Denso Female) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
ID2000 injector (60mm x 14mm)
|
Price:
$240.00
|
|
|
Product Code: 2000.60.14
Injector Dimensions:
- length: 60mm ( measurement taken from o-ring to o-ring)
- o-ring diameter at inlet / fuel rail side: 14mm
- o-ring diameter at outlet / spray side: 14mm
When ordering, please specify connector preference. You have the option to choose between:
- Clips & Pins: allow the installer to disassemble the factory connector and re-assemble with the Injector Dynamics (Denso Female) connector
- Pigtails: preassembled Injector Dynamics connector with 3" of unterminated wire to allow cut-and-crimp (or solder) installation.
Injectors are sold individually
|
|
|
Results 1 - 4 of 4
Last Updated: Saturday, 18 May 2013 17:07
|
|
|
|
    |
|
Products 
Audi 
