Product Code: R35-BB

 

Product Code: T1 R35 GTR Turbo Upgrade
T1 R35 GTR Cartridge Replacement with billet compressor wheel
 

Product Code: GT1R 2013 Tee
 GT1R 2013 T-Shirt
 

Product Code: 625GRX-1
      An Industry First, these forged pistons feature skirt diameters that correspond to the OEM Grade 1, 2 or 3 bores. Check the bore grades on the back of your block and order the appropriate quantities of Grade 1, 2 or 3 pistons. 

Pistons are sized individually, but are sold as a set of 6.

Click 'Product Details' for additional information...

 

Product Code: T1 R35 GT28 Install Kit
GTR turbo upgrade install kit.  Oil feed lines, oil restrictors, water lines, Goodridge 'firesleeve' for all hoses. (for use with any cartridge upgrade)

Oil return tubes not included, we recommend modifying the stock ones to fit over converting to AN lines.
 

Product Code: T1 Spec JE Pistons for GTR
T1 Spec JE Piston set for VR38 GTR engine.  99mm bore (4.0L).  Heavy duty wristpins, rings, and locks included.  Please specify desired compression ratio when ordering.
 

Product Code: JE Pistons for GTR
JE Piston set, 95.5mm bore (3.8L) , 9:1 comp forged pistons. Set of 6.
 

Product Code: Cobb Tuning AccessPORT w/ TCM
The AMS Nissan GTR Alpha MAF Sensors were designed to eliminate the drivability problems with big horsepower GTR's. These mass air flow sensors are designed and calibrated to handle big power yet retain daily drivability.


 

Product Code: Cobb Tuning AccessPORT

POWER. FLEXIBILITY. CONTROL. The AccessPORT is the industry leading OEM ECU flashing, managing and monitoring assistant. Unlock power hidden within the ECU by replacing conservative factory settings with more aggressive calibrations. The result is impressive gains in torque and horsepower while maintaining a high degree of safety. The AccessPORT comes with pre-installed maps that are optimized for common performance modifications.

Tuning flexibility ranges from simply loading one of the included performance maps designed for common modifications, all the way to complete custom map authoring using our powerful AccessTUNER software. Extract maximum power from virtually any modification while retaining the driveability and sophistication inherent in the OEM ECU.

 

Product Code: Manley 'Turbo Tuff' VR38 Connecting Rods

Manley Performance 'Turbo Tuff' series connecting rods for the VR38 / Nissan GTR 

 

Product Code: T1 ARP L19 GTR Head Stud Kit
T1 ARP L19 GTR Head Stud Kit
 

Product Code: GReddy R35 GTR Head Gasket Set

 

Product Code: T1 SB1 3.8
1 GTR Stage 1 short block build.  T1 spec JE pistons (3.8L displacement), Manley rods, OEM bearings, all machine work on short block, balance rotating assembly, blueprint and assemble. (Factory sleeves retained). 1,000+ hp capable.

Core required.  If no core is provided, $3,650 core charge will be applied.  Please specify when ordering.
 

Product Code: T1 SB2 4.0
T1 GTR Stage 2 short block build. Includes Darton sleeves, T1 spec big bore JE pistons (4.0L displacement), Manley rods, OEM bearings, all machine work on short block, balance rotating assembly, blueprint and assemble. Larger dispacement increases the torque output and turbocharger response. Darton Iron Sleeves increase strength of the cylinder walls. Copper o-rings provide superior sealing of combustion chambers.  1250+ hp capable.

Core required. If no core is provided, $3,650 core charge will be applied. Please specify when ordering.
 

Product Code: Kelford GTR 231-A Camshafts

266 degree, 10.00/9.25mm lift Nissan GTR R35 stage 1 cams to suit stock engines. Can use O.E.M valve springs if boost and rev limit are kept original

 

Product Code: Kelford GTR 231-B Camshafts

272 degree, 10.00/9.25mm lift Nissan GTR R35 stage 2 cams to give great midrange and top end power gains

 

 

Product Code: Kelford GTR 231-C Camshafts

276 degree, 11.25/11.22mm lift Nissan GTR R35 stage 3 cams to suit well built engines for street/strip or track racing

 

 

Product Code: T1 Stage 1 Head
T1 Stage 1 GTR Cylinder Head package.  Ferrea high RPM valvesprings and titanium retainers, full assembly, high performance valve job.

Cores required. If no cores are provided, $2,650 core charge will be applied. Please specify when ordering.
 

Product Code: T1 Stage 3 Head
T1 Stage 3 GTR Cylinder Head package.  Ferrea high RPM valvesprings and titanium retainers, Ferrea SS valves, full assembly, high performance valve job, full head porting and polishing.

Cores required. If no cores are provided, $2,650 core charge will be applied. Please specify when ordering.
 

Product Code: T1 Stage 2 Head
T1 Stage 2 GTR Cylinder Head package.  Ferrea high RPM valvesprings and titanium retainers, full assembly, high performance valve job, full head porting and polishing.

Cores required. If no cores are provided, $2,650 core charge will be applied. Please specify when ordering.