0 item(s) - $0.00
You have no items in your shopping cart.


Want the best parts and best service in the industry? You're in the right place. We've done all the hard work so you don’t have to. With over 18 years of experience building, tuning, and racing turbocharged imports… when it comes to deciding on the right parts for your project, we’ll make sure that you’ll get what you need the first time. If you're the slightest bit unsure about what will be needed, please contact us and we'll help you figure out the best solution for your application.

Our online store is only for orders shipped within the United States at this time, but we do ship internationally daily. Please email us as at sales@t1racedevelopment.com for international order inquiries or give us a call at 214-607-9022.

Featured Products

About Us

Opened for business: July 2005
Position: Owner / Bossman / Tuner / Driver
Responsibilities: Oversee the day-to-day business dealings for T1 Race Development and Injector Dynamics, Dyno Tuning, Race Car Driver, Product Development


As a teenager, Tony had always been mechanically inclined and heavily into BMX bikes…which naturally led to him scoring his first job working as a mechanic at a local bike shop. Soon after, he made the jump to working on cars. It all started in 1996, just after high school, when he purchased a set of lowering springs for his 93 Civic DX and installed them himself. The shop he had purchased them from was impressed with how quickly he performed the install and offered him a job on the spot. Upon entry to the import performance industry, things took off and he continually learned and grew his skills and experience from there. During his time at this shop, he became the crew chief for the record-breaking Hot Rod-class Honda Civic, the lead fabricator, and lead tuner. After 7 years had passed, Tony was offered a position to work as a chassis / race fabricator at Norwood Autocraft, where he spent 2 years building some of the most cutting-edge and forward thinking FWD drag cars to ever compete. In 2005, the decision was made to do his own thing and open up T1 Race Development. 8 years after opening the doors in July of 2005, things are going better than ever and T1 is experiencing continuous growth in all aspects of the business. In his time off, Tony enjoys spending time with his wife Amie, his daughter Lola, his little boy Kobe, and the rest of his family. He also enjoys working out, racing shifter karts, and hanging out at the pool on the weekends.

Hire date:February 2013
Position:GTR Tech
Responsibilities: All-around project build mechanic, and injector machining


As a kid I really only wanted one profession as an adult; to be apart of a race team. A work release program in high school placed me in a local dealership at 16 and that is what got my automotive career rolling. From there I went onto UTI in Houston where I graduated in the top percentile of my class and was accepted to further my education with the Mercedes Benz Elite program. That summer at 19, I became an ASE master certified technician. I spent the next several years in dealerships specializing in all aspects of high end luxury and performance vehicles.

My current project is an Acura Integra GS-R that I have had since I was 16. It's come a long way and had many different setups in it and even belonged to a best friend for a few years. With the help of Tony and Matt it now makes 900hp and is ready to attend many IFO events in 2014, so keep an eye out for it and come and say hi if you happen to see me at an event!

T1 Race Development, to me, has been the standard for excellence in the performance industry. For several years I have followed and supported Tony as he continued to prove the undeniable talent of this shop. To now be apart of such an amazing team and be surrounded by the incredible knowledge and raw talent here can only mean great things for me as a technician. I am thoroughly excited every day for work can't wait to see what the future holds.

Hire date:June 2013
Position:GTR Tech
Responsibilities: High-level turbo system, fuel system, and drivetrain fabrication, GTR engine building, injector machining, all-around project-build mechanic


My dad taught me how to drive anything with wheels as soon as I could walk. I started competitive racing ATV's at five and moved to dirt track racing at thirteen. I started out running mini stocks, then modifieds, and eventually moved to sprint cars. My first import was a 2000 Civic SI, and I fell in love with Japanese vehicles. I began building and modifying Evo's and currently hold the Centerville, AR track record in Super Import as well as numerous wins in autocrossing. My focus was to build a street car that was consistent and fast, and that's exactly what I did.

My journey to T1 has been one of hard work and diligence. I always knew that working for Tony was my ultimate goal, and I put the work in to get here. My job encompasses my passion in life, so it doesn't even feel like work. It feels like an extension of what I was already doing in my free time.

I know with the experience I'm surrounded with everyday at T1 that I will become the best mechanic and driver that I can be. The wealth of knowledge is insurmountable.

Hire date: March 2011
Position:Sales. Well, that’s the short story haha! First and foremost, I try to always deliver excellent customer service to our retail and wholesale customers alike; be it by telephone, email, or even walk ins. I do a good part of the wholesale invoicing so that is a big part of what I’m responsible for also. I even do a little purchasing, receiving, shipping, and some filing when it starts overflowing!


I love working here! I’ve been around cars since I was a small child. My father had (and still has) a 1970 Chevelle with a 454 big-block with nitrous, always loved that car. I started working on cars when I got my first vehicle, when one day my dad brought home a beat up 1986 Dodge Ram. It wasn’t exactly what I wanted but it had wheels on it! My dad and I put a lot of work into it, painted it, got a rebuilt engine and dropped it in, redid the interior, etc. It was a good experience and taught me how “everything is hard”. After that I got my first Honda, a super clean Captiva blue 1993 Civic hatch. I swapped in a d16z6 and converted the car to manual after the engine dropped a valve for no reason almost immediately after purchase, before that I never turned a wrench on a car like this. I was hooked. I ended up saving up for a while and finally swapped a b18b1 and then saved for another year or two to get my first turbo kit! That’s when the fun really started. I’ve had eight Honda’s all together by now and the new project is an IS300, it’s going to be my coolest build yet!

Hire date:April 2009
Position:International Shipping Manager / Inventory Control / Product Assembly
Responsibilities:Packaging of all T1 / Injector Dynamics shipments, Management of Inventory, Assembly of T1 / Injector Dynamics products to be shipped out


Carlos started out with T1 back in 2009 as a shop tech…performing installs, doing motor swaps, and some light fabrication work. As the business grew, the need for a dedicated shipping manager arose, and Carlos was chosen as the man for the job. He manages the grouping, assembly, and packaging for the 30-50 packages that ship out of T1 on a daily basis. His attention to detail and high level of thoroughness are applied to every order, which means that you can count on Carlos to get your order right, every time. He started getting into the performance scene pretty heavily at the age of 16, while hitting up the local late-night street racing spots in his hometown. He has owned/built quite a few Hondas along the way, including: a GSR-swapped 95 Civic coupe, a black 93-model B20/VTEC-swapped Civic hatch, a white 93-model LS/VTEC-swapped Civic hatch, a white 97-model Integra with a fully-built B20/VTEC and Type R transmission, a red 99 Integra with a JDM front conversion and GSR motor, and most recently a turbo S2000 he built. Carlos currently pilots a 2013 STi with some big plans in mind. Outside of work, Carlos likes to hit the gym 3-4 times per week, spend quality time with his fiance, and check out the local car-meets.

Hire date:June 2014
Responsibilities:Shipping/packing, T1 product assembly


Growing up I've always had a thing for fast cars. As time went by I found myself always helping my dad work on his car; safe to say I was eager to lend a hand. I learned how to drive stick around the age of 12, and by the time I was 15 landed my first job and saved up for my first car. I bought a red Integra with a JDM front clip. By the age of 18 I had my handful of Hondas. If I wasn't in school I was outside working on my car or a friends' car constantly trying to learn something new. T1 has always been a dream job for me, I've always looked up to Tony as being the best at what he does! It's honestly a privilege and an honor to work for him. I am truly grateful to be surrounded by amazing co-workers that share a common passion for the sport of racing, and are there to share their raw knowledge. Excited about the future!

Hire date:May 2012
Position: Shop Assistant / Shipping Assistant
Responsibilities: Product assembly, order preparation, shop duties


As you may have guessed by the last name...he is Tony’s younger brother (and has an twin brother named Nick). Since he has been with T1, Frank has been building on the knowledge and experience that he has gained during his five years of prior experience in the automotive industry. He is always ready to assist Carlos with building assemblies and preparing orders. He also works with Matt and the crew in the shop, assisting wherever his help is most needed (including keeping things tidy), and also helps with local parts pick-up and delivery. Aside form working at T1, he also works as a bouncer at a local breastaurant…making sure no boobies step out of line. And in his free time, he enjoys riding his motorcycle, working out, spending time with the family, and racing radio-controlled cars.

Hire date:November 2012
Position:Project Manager
Responsibilities: Setting up customer builds, keeping project builds on track, customer relations, parts ordering and receiving, accounting, advertising, and media production


I have been interested in cars ever since I was young, probably due to learning to drive stick and riding shotgun in my Dad's 1970 Z28; which he still has. I didn't get much of a chance to start working on or racing cars until college when I got my first performance oriented car. It seems like a pretty small accomplishment now, but I modified my 2005 Cobalt SS (supercharged) with what I could afford through college; and too this day still hold the record for the fastest and quickest stock blower/stock motor car. I attended the University of Central Arkansas on a full academic scholarship and graduated in 2009 with a bachelor's degree in Business Administration. After college I started to get interested in the Honda world more, mainly due to my friends all drag racing them. Career wise I learned the service side of the auto industry through a couple jobs I held and was successful at. On the personal side of things, keeping in touch with my friends and family back in Arkansas is extremely important and I have an awesome lab/shepherd mix named Mia that is like my kid!

I respected Tony and his crew long before I received the opportunity to come work here, and I am ecstatic at the chance to help take this shop to the next level. He has an awesome group of guys already in place and I can see nothing but great things in the future. Keep an eye out for what T1 has in store for the future, you will not want to miss it!

Hire date:March 2013
Responsibilities: Sales, customer relations, and technical support


I've always had a passion for cars since I was kid thanks to my dad. It started with toys and then moved on to reading his car magazines and remembering 0-60 and 1/4 mile times for pretty much any car out there. When I became old enough to drive I went straight to Hondas. My first car was a 1998 civic and then I went on to a GS-R with a supercharger on it. That then led to a swapped and boosted EG hatch and then a T1 built Evo with a custom GT35R setup on it which was featured in Dsport magazine. So that's my background with cars, now let's move on to my other passion. Along with cars came my interest in photography and photographing cars. I have a photo journalism degree from UNT and throughout college I did freelance work for Modified magazine, Modified Mustangs, Modified Luxury and Exotics, Dsport, and TunerZine.com with my first published work appearing in Dsport in May of 2005. Always keeping in touch with Tony and traveling to races along with the T1 crew I took the opportunity to join it in March of 2013 when growth led to an opening in the sales department.

Hire date:April 2015
Position: Fabricator
Responsibilities: Inventory Parts Fabrication/Custom Vehicle Fabrication


Hire date:June 2015
Position:Shop Assistant
Responsibilities: Assist in day to day operations, facility cleanliness

From a young age I have always had two passions that my father swayed me towards. Fast cars and shooting firearms. I started shooting at the age of 5 and slowly became better as I aged and matured. I achieved the rank of Eagle Scout and received numerous awards for marksmanship during my time in Boy Scouts.

The term “fast car” changed very quickly after joining the T1 Team. My past cars include a 350z, C5 Corvette, and a turbocharged Mini Cooper. I enjoy going out to DKC and having some friendly competitive go-kart racing every now and then! I am learning more and more everyday with the vast amount of knowledge present at the shop and plan to build a fun street car under the guidance and wisdom of Tony.

I had always seen videos and heard of the infamous T1 GT1R cars growing up and videos don’t do the cars or the business justice. The attention to detail and fine craftsmanship is superb. For me to be able to wake up everyday and look forward to working with such an amazing group of people each day is a gift. Whether my day consists of cleaning the shop, organizing product inventory, or heading out to a race event I thoroughly enjoy every minute of it. I have the utmost respect for Tony and the T1 Crew and cannot wait to see where we go next!

Our Projects

Being focused primarily on Full Project Builds means that you’ll find us turning wrenches on anywhere from 8 - 10 projects in the shop, on any given day. The unfortunate part of this is that unless you’re here…you don’t usually get to see them. We’ve decided to change that. Stay up to date on the progress of our project builds here, with photos and build-diaries updated often…



Whether you're in the process bringing a project to completion, or taking the next step in the path of upgrading your engine's performance, the most critical piece of the puzzle will always be the tuning. Countless hours and cubic dollars are invested in building a high performance vehicle (not to mention the blood & sweat). Time spent researching, obtaining, and assembling all of the best parts for your engine is important, but without optimization of the fuel and spark those parts can quickly become paperweights. Even the best symphony in the world is nothing without a conductor to orchestrate the events with flawless timing and perfection.

We pride ourselves in providing the best tuning solutions available. With over 15 years of experience in tuning electronic fuel injection systems, we have the track record and reputation to prove our capabilities. DSport Magazine thought so too, when they named Tony Palo to their 'Top 10 Tuners of the Past 10 Years' feature (Sept. 2012).

As our primary tuning tool, we utilize a state-of-the-art Mainline Pro Hub 4,000hp Dyno. Data analysis and recording is important for tuning and especially troublshooting. Our dyno is fitted with fuel flow meters (in and out), an ethanol content analyzer, multiple pressure and temperature sensors, voltage inputs (handy for logging fuel pump voltage during a run), etc.

We also work closely with EFI University to educate tuners about fuel injection and have hosted both EFI 101 and EFI 102 (Advanced Tuning Concepts) classes, as well as attending Motec's Version 3 and M1 tuning courses.

At this time we are focusing on the R35 GT-R platform and only tuning on that application. Please contact us for pricing.

Perfection doesn't always come in a 'bolt on' format.   We have the tools, experience, and ability to tackle any fabrication necessary for our project builds.  You can feel safe knowing your project will be handled under one roof from beginning to end and you will receive nothing but top quality service in all regards. 


For your convenience, payment for items purchased on this website can be made with all major credit cards, via PayPal, or over the telephone. Your order will be processed and will be shipped once the verification of payment is received and confirmed.
Acceptable forms of payment are listed below:

  • Credit Cards (VISA, Master, AMEX, Discover)
  • PayPal
  • Certified Bank or Cashier's Check
  • Wire Fund Transfer (required on all international purchases)

All merchandise remains the property of T1 Race Development until payment is fully accepted. In the event that a typographical error in price is made, your order will be held until you are contacted and an appropriate course of action is made. We will not be held responsible or be obligated to provide a product at a price which was quoted in error. All prices are shown in United States currency ($US dollars). Prices are subject to change without prior notice. You will be notified of any price change at the time of order. Prices do not include Shipping or Handling Charges, unless otherwise stated.


Items will be shipped via United Parcel Service (UPS) unless prohibited by size or weight, in which case a motor freight carrier will be used. Expedited shipping may be available at additional cost upon request. Once your order is shipped, please allow 5-7 days for delivery unless expedited / guaranteed service was selected at the time of purchase. T1 Race Development is not responsible for any packages once in transit, so please carefully check all packages before accepting delivery. It is the customer's responsibility to receive the package at the given address.

T1 Race Development properly checks items before shipment is released and delivers merchandise to UPS couriers secured, protected and in a safely packaged manor. If a package appears damaged when you receive it, indicate the condition of the package upon your receipt of goods from UPS along with your validation. If damage is discovered after opening the package, notify the UPS immediately. Claims for damage must be handled through the shipping courier, not with T1 Race Development.


T1 Race Development does not accept unauthorized returns. All returns require a Return Merchandise Authorization number from T1 Race Development. Please contact us at 214-607-9022 and ask to obtain a RMA. All returns must be shipped back in new condition and original packaging within 30 days of delivery and are subject to a 15% restocking fee. Returns will not be accepted for used or special order items, electrical devices or items which have been modified in any way - no exceptions will be made.


T1 Race Development stocks most items in order to facilitate the quickest possible delivery to our customers. However, due to high demand and the 'custom' nature of certain parts, particular items may not be in stock. If a certain item is not in stock, it will be shipped at the earliest possible date. Prepayment in full is required for special order items. Special order items are non refundable.


T1 Race Development has carefully chosen its product offerings, and all products are guaranteed to be first quality merchandise. Many products carry a manufacturer's warranty. T1 Race Development will pass this warranty on to the original buyer. Parts purchased used or purchased through unauthorized distribution channels will no longer carry a warranty whatsoever. There is no warranty, expressed or implied, on any parts used for competition or track events. Additionally, there is no warranty on electrical parts. Buyer shall notify T1 Race Development immediately upon discovery of any product defect.

Defective items must be returned for replacement in accordance with our return policy and at buyer's expense. We will replace all defective items that meet our return/replacement requirements, but will not accept any liability for loss or inconvenience caused by their use or failure. All warranties are voided if defect has been caused in whole or in part by improper installation, abuse or misuse. We reserve the right to withhold issuance of credit until returned defective part has been examined and tested.

The warranty period is 1 year from the date of purchase, and ONLY covers manufacturer defects. As with any aftermarket fuel injector, in order to have the expected longevity the customer must use the proper type of fuel and filtration in the fuel system. Failure to do so will decrease fuel flow, longevity, and reliability. Instances where the customer has failed to take the proper filtration measures or ignored warnings about fuel types will not be covered under warranty.


The purchaser of any product releases the manufacturer of the part, T1 Race Development, and Injector Dynamics from all liabilities pertaining to the use of the part; buyer assumes all liability and risk associated with the use of all products. The purchaser recognizes that any alteration or modification to any motor vehicle may increase the risk of injury or accident and may render the vehicle illegal for use on public roads and highways.

Contact Us


Personal Info


* Required Fields


Powered by WebForms



Latest Posts

TX2K16 Race Recap

2016-05-12 20:41:23

Every year in Houston, TX there is a gathering of some of the baddest street and race cars in the country, for an event called TX2K.  This year marks the 16th annual event and it didn’t disappoint.   The four day event gave racers two days of Roll Racing and two days of Drag Racing, and four days of fun.  The T1 Race family showed up in force! 

 The first event was the Roll Race, where you have two cars pacing each other at 60-65mph, and race for approx. 1,500 feet, first to the finish line wins.    For qualifying in the Roll Race, each racer makes single passes, focusing on start speed and leaving at a predetermined start flag.  The qualifying ladder is based by trap speed.  The top qualifier was Mullet in his UGR Gallardo, with over 2000hp pushing it to a 202mph trap speed.   Our own Ben Haynes wasn’t far behind and ended up in the second spot in his GT1R Series 6 build with a 198mph trap speed.  

The slowest car in the Unlimited Class was a 176mph car, which shows how strong the field really was.   Ben worked his way through the ladder, running consistent 195-199mph passes and landed himself in the finals, facing the man himself, Mullet.  

 Now we mentioned earlier that the race is about who gets to the finish line first, but the qualifying is about who has the highest trap speed.   Trap speed is a good indicator of horsepower at the top of the track.   ET is a good indicator of traction and average power.  While many of the GTRs don’t make the horsepower of the bigger twin turbo V10 Lambo builds, they do make very good use of the power they have.   In the finals Ben was able to hold off Mullet and take the win, in a great race that ended with less than a car length at the finish line!  It was a good day for the GTR in the never ending Lambo vs GTR battle.   Hats off to Mullet, he took the loss like a champ and came and shook Ben’s hand like the gentleman that he is. 

Saturday morning was the start to the drag racing, which all of the T1 Race family was very excited about.  We had a lot to show, with a few cars that hadn’t seen the track in their current configuration, hoping for new personal bests across the board. 

 Dan brought out his daily-driven GT1R Series 3.5 build to see how it would fare on drag radials.   Coming into the event his best time was a 9.7 on 20” Michelin tires.  As the weekend progressed and we got things dialed in, he got quicker and quicker, ending with a 9.0 pass and a new personal best by a long shot!

Tony Pasek also brought out his time capsule GT1R Series 3.5 build.  Unlike Dan, Tony has a lot of track time on his with drag radials, and it runs 9.1, every time, every track.  Every freaking time for the better part of two years.   Until this race.  With the good air we had and the excellent track prep by the TX2K and Houston Raceway Park crew, Tony finally got his 8, with an 8.99 and a solid second place finish in the GTR Class 2!

Moving up to GTR Class 3, we had Tuan hold the torch in his GT1R Series 5 build, fresh with a new Motec M1 upgrade and no track time.   Much like Tony, Tuan has battled the 9.0-9.1 monkey for a long time now, getting oh so close to that 8 second pass.  Not this weekend though, Tuan knocked that 8 out twice in a row with his first two passes being 8.9’s.   With a little tweaking on the ECU over the weekend we were able to get him an 8.6 and the GTR Class 3 win!

Ben was our man for GTR Class 4, with a strong 8.0 pass on his first hit.  Unfortunately his 2nd gear had had enough and cut his weekend a little short.  Guess you can’t get too mad about a gear giving up with over 1650whp and 4100lbs to drag around; it did well in it’s few years of duty.   “That’s racing.”

We didn’t race the roll race in the T1 shop GTR as we were saving it for the drag race event.  Coming off a recent 2nd place finish and GTR record pass (210mph) at the Texas Invitational, and a recent new half mile GTR record at 235.6mph, our sites were set on the drag record.  

 Previous to the TX2K16 event the US quarter mile record was 7.48 at 192.9mph held by AMS Performance in Alpha Omega.  The current world record for the GTR is 7.20 at 202mph held by our race partners in Bahrain, EKanoo Racing.

The first test hit with our new combo was Friday night, with a solid 8.0 at 181mph.  All worked and that gave us lot of data to sort through for Saturday.   Saturday morning we made our first hit after loading the new ECU calibration and it worked,  7.43 at 196mph, new US record on the second pass of the car.   Digging through the data was exciting, because it wasn’t anywhere near all in!  We continued to chop away at that over the weekend, with a 7.41 at 204mph, and a 7.38 at 196mph, winning GTR Class 5 and posting the quickest and fastest times for the entire event.   More to come as we continue to figure out what the beast wants, with our aim set on the world record.

To say it was a great weekend for the T1 Race family would be an understatement.   With personal bests, wins, records, and a great time for everyone, you can be sure you’ll see us all back at it again next year!

 Thank you all for your support and kind words.  We met a ton of great people at the event and I don’t think there was a time where someone wasn’t coming by telling us how much they enjoyed watching our cars run and getting to see them up close and personal.   It means a lot to us and we’re glad we’re able to put on a good show.  This is a passion we all share, and coming to events like TX2K and meeting people with the same passion is what it’s all about. 







Posted By Stuart Leiby

Pikes Peak Racing Sets US 1-Mile Record!

Our long time customer Rob Brooks of Pikes Peak Racing took delivery of his most recent GT1R Series 7 build, and promptly put the car through its paces.  This round of modifications consisted of a new 4.1L T1 Spec aluminum rod engine, T1 modified ETS top mount turbo kit, Magnus dry sump oil system, and Shep stage 5 transmission, along with various other supporting components.  On the dyno it laid down a very respectable 1,700whp!

On the day of delivery he personally piloted the car to an 8.20 at 176mph ¼ mile in the Texas summer heat! With his eyes on a bigger prize he loaded up the car and towed it back home Colorado where the Colorado Mile was taking place the following weekend.

At the Mile race Rob wanted the US record and he wasn’t planning on leaving until it was his. Rob’s enthusiasm for racing and pushing the limits is part of what makes him such an awesome member of our family, and he didn’t let us down! After several 220-230mph run he was ready to go all in and absolutely destroyed the current record of 235mph. At 246mph everyone was thrilled and Rob had done just what he wanted, the same week he had picked the car up!



We have some seriously high hopes for this car, Rob, and the entire Pikes Peak staff, so stay tuned and we will keep everyone in the loop as the records continue to fall!

Posted By Tony Palo

New Injector Dynamics Subaru WRX Injector Adapter

In our constant effort for improvement, the Subaru WRX injector fitment has been updated with our new lower injector adapters.  The factory injectors seal in the injector bores with a square o-ring and the compressive force from fuel pressure pushing on the face of the o-ring.  

Our new lower adapters allow for more connector clearance when using the 34mm injector bodies (ID850, ID1300, ID1700, and ID2000) and convert the sealing over to a more reliable o-ring bore seal.  The new adapters feature an o-ring on the outside to seal in the factory 16mm bore, and the injectors seal on the inside of the adapter using a typical 14mm o-ring.  

All Injector Dynamics Subaru WRX fitments (except our side feed to top feed conversion kits) are now shipping with the new adapters.  These adapters also apply to the Subaru BRZ and Scion FR-S fitments.  

Posted By Tony Palo
Powered by