MapEV Performance Tuning for Porsche & Audi EVs T1 Race Development is proud to offer the MapEV tuning solutions for select Porsche and Audi electric vehicles.
What to Expect? Impressive gains for all models, although some models will gain notably more because they came with lower power from the factory. Performance gains vary by model, see second image in gallery for current model offerings and results.
Vehicle Compatibility MapEV currently supports pre-facelift models (generally anything from late 2024 onward is not yet supported):
Porsche Taycan – Turbo, Turbo S, GTS, 4S, 4, and Base
Audi e-tron – GT and RS GT
How to Order
At this time we are only offering pre-flashed controllers. For a pre-flashed controller you will first need to identify the software version on your car via the MapEV Diag software and an ENet cable via OBD. See below for details.
Purchase the tuner (and cable if needed) here.
Someone from our sales staff will follow up and confirm the next step depending on if you needed the cable or already had one.
IF NO VALID VIN IS SUPPLIED WE WILL HOLD YOUR ORDER UNTIL YOU DO SO. FURTHERMORE, WE REQUIRE THE VEHICLE BE IDENTIFIED VIA THE MapEV DIAG SOFTWARE BEFORE WE CAN SHIP A FLASHED CONTROLLER TO YOU. YOU MAY ENTER YOUR VIN AT THE BOTTOM OF THIS PAGE.
Shopping for fancy new carbon Tillett seats is fun, shopping for the parts to install them isn’t nearly as much fun though. We get it, and took the steps to make install a breeze. Our seat base kits come with your choice of standard inward (STBI) or outward (STBO) facing Tillett seat brackets, Sparco sliders, stainless hardware, and your choice of both driver and passenger seat bases, or just a driver or passenger seat base. Obviously, this kit doesn’t include the seats. Go pick your dream seats out here, add this kit to cart, check out, and we will handle delivering your shipment of carbon happiness.
These kits are compatible with the following Tillett seat models: B6S, B6SXL, B6, B6 XL, B7, B7XL, B8, B9, B10, B10XL, C1 & C1XL
Shopping for fancy new carbon Tillett seats is fun, shopping for the parts to install them isn’t nearly as much fun though. We get it, and took the steps to make install a breeze. Our seat base kits come with your choice of standard inward (STBI) or outward (STBO) facing Tillett seat brackets, Sparco sliders, stainless hardware, and your choice of both driver and passenger seat bases, or just a driver or passenger seat base. Obviously, this kit doesn’t include the seats. Go pick your dream seats out here, add this kit to cart, check out, and we will handle delivering your shipment of carbon happiness.
These kits are compatible with the following Tillett seat models: B6S, B6SXL, B6, B6 XL, B7, B7XL, B8, B9, B10, B10XL, C1 & C1XL
There are currently tariffs on all Tillett parts which will be assessed once an order is processed. With as fluid as these have been, it’s nearly impossible to stay accurate on the rate every day. We will reach out before the order is fully processed to confirm the tariff rates and get approval. Feel free to contact us with any questions before ordering.
Shopping for fancy new carbon Tillett seats is fun, shopping for the parts to install them isn’t nearly as much fun though. We get it, and took the steps to make install a breeze. Our seat base kits come with your choice of standard inward (STBI) or outward (STBO) facing Tillett seat brackets, Sparco sliders, stainless hardware, and your choice of both driver and passenger seat bases, or just a driver or passenger seat base. Obviously, this kit doesn’t include the seats. Go pick your dream seats out here, add this kit to cart, check out, and we will handle delivering your shipment of carbon happiness.
These kits are compatible with the following Tillett seat models: B6S, B6SXL, B6, B6 XL, B7, B7XL, B8, B9, B10, B10XL, C1 & C1XL
There are currently tariffs on all Tillett parts which will be assessed once an order is processed. With as fluid as these have been, it’s nearly impossible to stay accurate on the rate every day. We will reach out before the order is fully processed to confirm the tariff rates and get approval. Feel free to contact us with any questions before ordering.
The industry’s first solution for V10 builds, the SFI 1.1/1.2 approved HPL DL800 flywheel is designed to withstand increased torque and high horsepower. It offers the ability to inspect and service while maintaining OE weight and features a Diamond Friction washers with upgraded fasteners.
