0 item(s) - $0.00
You have no items in your shopping cart.


Shane T 700lb/hr Fuel Injectors

More Views

Quick Overview

Shane T Spec Billet Atomizer 700lb/hr (@90psi) Fuel Injectors

These are our go to for max effort methanol applications. Paired with a set of ID1700x primaries and a mechanical fuel pump, they'll comfortably supply well over 2600whp on M1 or M5 methanol.

We modify these injectors to fit the factory GTR cylinder head, and the head will also require very slight modification to allow the body to clear at the intake ports. These will not work with normal spec fuel rails, as they're 12mm longer than the normal GTR fitment. We do offer rails specifically to suit this injector fitment, our GT1R V3 Fuel Rails .

We run these in the cylinder head for fitment reasons (too long to fit in the intake), and we control them as secondaries, so the engine idles on the smaller injectors further upstream in the intake runner.

These injectors require an 8 amp open current and 2 amp hold current. We can help you with Motec M1 driver settings. These will also work with a Syvecs ecu, though you'll need to get with Syvecs on the proper driver configuration for them.

The electrical connector on these are EV1, and are not included. We offer both raw connector kits or PNP wiring adaptors for an additional charge.


* Required Fields


Availability: In stock

Questions? Call us! 214-607-9022

You may also be interested in the following product(s)

Powered by