2019-2024 Taycan Turbo S MapEV Performance Tuning

MapEV Performance Tuning for Porsche & Audi EVs
T1 Race Development is proud to offer the MapEV tuning solutions for select Porsche and Audi electric vehicles.

What to Expect?

Power Gains

The Taycan Turbo S allows for 789HP / 774 ft/lbs from factory in launch control mode at 100% SoC. The factory supplied figure of 751 HP is delivered at up to 85% SoC. With our software upgrade the full launch control power and torque are available during normal driving, giving a power increase of 173 HP and a torque increase of 73 ft/lbs.

Our software includes a special function, which at wide open throttle puts the motor controllers into launch mode even during normal driving. Simultaneously the suspension is stiffened and the traction control adjusted for optimal acceleration. Without this unique function, that only we provide, it is impossible to exceed 701 ft/lbs of torque outside of launch control.

Improved Throttle Response

The powertrain controller has a feature called “Anti-surge damping” or in simpler words – torque request filtering. It exists for two reasons – to provide refinement of the power delivery and protect the drivetrain from excessive lash.

Completely disabling the damping is not a good solution – resulting in jerky throttle behaviour and being potentially damaging to the powertrain due to excessive bucking. The controller contains a function, which is not calibrated and disabled from factory – “Filter deactivation with pre-tensioned drivetrain”. We enable and calibrate this function, which as long as there is sufficient forward torque on the powertrain allows bypassing the filtering whenever the driver performs sudden throttle movements.

For you this means much sharper and less delayed throttle response during spirited driving without affecting the carefully crafted refinement of the vehicle or placing undue stress on the powertrain.

Optimized Shiftpoints 

The shiftpoints in the transmission have been optimized in all modes to provide consistent power delivery allowing for the largest possible area under the curve.

How to Order

At this time we are only offering pre-flashed controllers.  For a pre-flashed controller you will first need to identify the software version on your car via the MapEV Diag software and an ENet cable via OBD. See below for details.

1. Purchase the tuner (and cable if needed) here.
2. Someone from our sales staff will follow up and confirm the next step depending on if you needed the cable or already had one.
3. Download the MapEV Diag software.
4. Connect the cable between the vehicle and the PC, turn on the ignition.
5. Click the “Scan Vehicle” button.
6. Click the “Read ASG Info” button, and agree to upload the data to MapEV.
7. Alert your sales rep that the process is complete, and we will handle getting you your magic horsepower controller delivered!

Installation
The controller installs in about an hour, even for first-timers. Here is a video of the installation process by MapEV.

IF NO VALID VIN IS SUPPLIED WE WILL HOLD YOUR ORDER UNTIL YOU DO SO.  FURTHERMORE, WE REQUIRE THE VEHICLE BE IDENTIFIED VIA THE MapEV DIAG SOFTWARE BEFORE WE CAN SHIP A FLASHED CONTROLLER TO YOU. YOU MAY ENTER YOUR VIN AT THE BOTTOM OF THIS PAGE.