T1 Cam Trigger Kit B Series with Intake Gear

Kit with Matching Intake Cam Gear

The use of this kit
allows you to change from the factory honda mag sensors in the
distributor to a more precise digital signal from this sensor. Many
aftermarket ecus read the Hall signal much better than they do the oem
signal from the distributor. A lot of times you’ll notice a smoother
idle & much smoother power at high rpm. This also allows complete
removal of the factory distributor when a multi channel CDI box &
individual coils are used with it. If you want to keep a single channel
ignition box & the distributor, then this setup can still be used.
These signals are on the input side of the ecu, while the ignition
system is on the output. Any combination of ignition box/coils will
work. This kit consists of 1 Golden Eagle cam gear that’s
been machined & custom fit with rare earth magnets installed in it,
1 matching intake cam gear, 1 Dual Pole hall sensor & it’s mating connector, the billet sensor bracket, & installation instructions.