Motec E888


The E816 and E888 Expander modules are designed to increase the I/O (input/output) capacity of MoTeC products.

With CAN connectivity and a number of configurable inputs and outputs, they provide customers with greater flexibility to add sensors, customise channels and control more auxiliary functions.

The E888 and E816 expander inputs have medium resolution and update rate, where higher update rates or resolution are required consider using the VIM input expander.

Compatible with:

SDL3 – only 8 thermocouples on E888
ADL3 / EDL3 – up to two E888 or E816
ACL – up to two E888 or E816
M400, M600, M800, M880 – one E888 or E816

Depending on the application, some limitations may apply when using an expander with these ECUs. Please check with your dealer for details.

$1,030.00

QTY

Details


SPECIFICATIONS

Inputs

  • E888
    • 8 x analogue voltage inputs, 10 bit (4.9 mV) resolution
    • 0 to 5 V, suitable for potentiometers, voltage output sensors and variable resistance (temperature) sensors
    • 8 x thermocouple inputs, 1 °C resolution
    • suits K type thermocouples (-200 to 1250 °C)
    • 2 x cold junction compensation thermistor inputs
    • 4 x digital inputs with frequency measurement and switched capability
    • 2 x switch inputs
    • Update rate for all inputs 200 Hz, for a second expander 50 Hz
  • E816
    • 16 x analogue voltage inputs, 10 bit (4.9 mV) resolution
    • 0 to 5 V, suitable for potentiometers, voltage output sensors and variable resistance (temperature) sensors
    • 2 x general purpose temperature inputs, calibrated as Bosch water temperature sensors
    • 4 x digital inputs with frequency measurement and switched capability
    • 2 x switch inputs
    • Update rate for all inputs 200 Hz, for a second expander 50 Hz

Outputs

  • 8 x PWM outputs
  • individually controllable for frequency and duty cycle.
  • 4 x adjustable duty cycle 0 to 100% in 255 steps and frequency range from 8 Hz to 5 kHz
  • 4 x adjustable duty cycle 0 to 100% in 20 steps and frequency range from 1 Hz to 100 Hz

Communications

  • CAN bus used for communicating to the data acquisition, display or ECU and to the PC during calibration and firmware upgrades

Configuration

  • Configured as part of the configuration for the connected ECU or data logger.

Physical

  • Case size 99 x 105 x 40 mm

Weight

  • E888 310 gram
  • E816 320 gram

Connectors

  • E888 two part 60 pin waterproof connector with gold plated contacts
  • E816 66 pin Autosport connector

Comments & Reviews

Reviews

There are no reviews yet.

Be the first to review “Motec E888”

Your email address will not be published. Required fields are marked *

Contact Us

Have Questions or Need Professional Insight?