FP HTZ GT3586R Ball Bearing Turbocharger
FP HTZ GT3786R Ball Bearing Turbocharger
Introducing the new FP HTZ™ GT3786R everything you love about the FP HTZ™ GT3586R with a little more oomph! It combines the greater turbine flow found in the GT37 with the 75lb/min flow rating of the 86HTZ™ compressor. The compressor wheel measures 62.1mm inducer and 86.2mm exducer. The turbine wheel measures 72.5mm inducer and 66.5mm exducer.
This wheel combination extends mass flow well beyond 75 lb/min with observed power output in the 730+whp range on well prepared cars. This turbo is available with a variety of turbine housings, but using anything smaller than a .82 is stupid.
Bronze ball cages eliminate cage failure due to heat soak and extended high temperature operation. Without bronze cages, hot shut down can result in melted phenolic cages and failure upon subsequent startup.
Compressor wheel – 86HTZ
Flow rating – 75LB per minute
CW Measurements – 62.1MM Inducer / 86MM Exducer
TW Measurements – 72.6MM Inducer / 66.3MM Exducer
Compressor Housing – 84MM FAP Covers
Turbine Housing – FP .85 T3 TH
CHRA – 8MM BB
Oil Line – Not Included