FP HTZ GT3794R

The FP HTZ™ GT3794R turbocharger is the next step beyond the FP HTZ™ GT3586R in power production within the GT35R footprint. It combines the greater turbine flow found in the GT37 with the 90lb/min flow rating of the 94HTZ™ compressor. The compressor wheel measures 67.5mm inducer and 94mm exducer. The turbine wheel measures 72.5mm inducer and 66.5mm exducer.

This unit has a standard GT35R configuration, so it can easily replace an existing GT35R without modifying the header or manifold. It is available in T3 inlet with either 3″ vband or 3″ 4 bolt outlet, T4 Divided or TiAL Vband options.

This turbocharger is recommended for applications running 40psi boost pressure that target the 800-900whp range. The FP HTZ™ GT3794R has exceeded 900whp easily during testing as well has running 8’s in the quarter mile with trap speeds in excess of 160mph.

Bronze ball cages eliminate cage failure due to heat soak and extended high temperature operation. Without bronze cages, hot shut down can result in melted phenolic cages and failure upon subsequent startup.

Compressor wheel – 94HTA

Flow Rating – 90LB per minute

CW Measurements – 67MM Inducer / 94MM Exducer

TW Measurements – 72.6MM Inducer / 66.3MM Exducer

Compressor Housing – T4S Cover

Turbine Housing – FP .85 T3 TH

CHRA – 8MM BB

Oil Line – Not Included