What is the flow rate and operating fuel pressure of the ID1750-XDS?

The ID1750-XDS flows 1,728 cc/min at 3 bar, or 43.5 psi, and up to 2,645 cc/min at 7 bar, or 101.5 psi.

What fuel types can the ID1750-XDS support?

The ID1750-XDS is compatible with all known fuels, making it suitable for pump gas, race fuel, and ethanol applications. For ethanol use, the complete fuel system should be designed to deliver the additional fuel volume required.

Do ID1750-XDS injectors require ECU tuning?

Yes. ID1750-XDS injectors require proper ECU calibration. A qualified tuner should configure injector scaling, dead time, offset data, short-pulse behavior, fuel-pressure compensation, and fuel type. Injector calibration is not optional. Poor injector data and tuning can cause rough idle, poor cold starts, unstable fuel trims, lean transitions, misfires, and unsafe fueling under throttle.

What connector or adapter is needed for this universal injector?

The ID1750-XDS uses a USCAR electrical connector. This injector is sold individually, so the required plug-and-play adapter, pigtail, or connector kit must be selected to match the vehicle harness and fuel system configuration.

ID1700 | Injector Dynamics | 1700.48.11.WRX-0

ID1750-XDS | Injector Dynamics | 1750.48.11.WRX

Details

ID1750-XDS, USCAR Connector, 48mm length, 11 mm (gold) adaptor top, Denso and -204 lower cushion

*** Injector Dynamics injectors are flow matched in sets. If you are needing a single injector, to replace one out of a set, please contact support@injectordynamics.com ***

$334.95

Details

Frequently Asked Questions

This ID1750-XDS injector, SKU 1750.48.11.WRX, is sold individually. The listing uses a USCAR electrical connector, 48mm body length, 11mm (red) adapter top, WRX-16B bottom adapters. Add the quantity required for your application.