Accord 92-95 | ID1050x | Injector Dynamics | 1050.60.11.14.4-0

Accord 92-95 | ID1050-XDS | Injector Dynamics | 1050.60.11.14.4

Details
Options

ID1050-XDS, for 92-95 Accord / F & H Series. 11mm (blue) adapters. Set of 4.

The ID1050-XDS is the evolution of the ID1050x.

The ID1050-XDS benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths.

Corrosion resistant internals make it compatible with all known fuels, capable of extended service life with corrosive fuels.

Compact body allows fitment in 200+ applications, including current and future engines utilizing short body injectors.

Stronger magnetic circuit offers stable operation up to 10 bar.

Replaceable inlet filter extends service life.

Base Specifications

Nominal Flow Rate – 1065cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – USCAR

$600.60

Details

Frequently Asked Questions About the Accord 92-95 ID1050-XDS Injectors

How do I know if I need the 11mm top O-ring kit for my Accord 92-95?

The 11mm kit is designed for the stock top-feed fuel rail on 92-95 Accords, ensuring a proper seal without modifications. Always check your fuel rail diameter before ordering.

Will these 1050cc injectors cause idle issues on a 4-cylinder Accord?

No. ID1050-XDS injectors are highly precise and come with dead-time data for tuners, allowing smooth idle and excellent low-throttle drivability even on E85.

Can these injectors support a turbo or high-boost E85 build on the Accord?

Yes. These injectors can reliably fuel up to approximately 450 WHP on E85 while maintaining safe duty cycles for high-performance setups.

Do I need adapters to connect the injectors to the Accord harness?

No adapters are required. The USCAR-style connectors plug directly into the factory Accord harness for a clean, plug-and-play installation.

Will the 60mm injector body fit under the stock Accord intake manifold?

Yes. The 60mm ID1050-XDS injectors are compatible with the stock top-feed fuel rails and will fit under the intake manifold without any clearance issues.