IS300 | ID1300 | Injector Dynamics | 1300.60.11.D.6-0

IS300 | ID1300-XDS | Injector Dynamics | 1300.60.11.D.6

Details
Options

ID1300-XDS, for IS300 / 2JZ-GE (non-turbo) applications. 11mm (blue) adapter tops. Denso lower cushions. Set of 6.

***Not compatible with models equipped with the air-assist intake manifold.***

The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.

While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.

Base Specifications

Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
Electrical Connector – USCAR

Details

Frequently Asked Questions About ID1300-XDS Injectors for IS300

What maximum E85 horsepower will the ID1300-XDS set support on a turbo Lexus IS300 (2JZ-GE NA-T swap)?

The ID1300-XDS (1335 cc/min at 43.5 psi) set of 6 injectors is crucial for single-turbo 2JZ-GE conversions. It supports E85 setups well into the 700 to 800 wheel horsepower range, providing the flow needed to safely maximize boost on the famously strong 2JZ engine platform.

What specific fitment components (length, top seal) are used in the 1300.60.11.D.6 set for the IS300 2JZ-GE fuel rail?

This ID1300-XDS set is configured to the universal 60mm O-ring to O-ring length and includes an 11mm blue adapter top with a Denso-style lower cushion (denoted by the 'D'). This combination provides the exact mechanical fitment for the factory IS300 fuel rail and manifold ports.

Does this USCAR ID1300-XDS set require PNP adapters to connect to the IS300 factory harness?

Yes, adapters are required. The ID1300-XDS uses the modern USCAR connector. The factory IS300 harness uses a Denso style connector. You will need six USCAR to Denso PNP adapters (ID P/N 90.3) for a clean, non-splicing electrical hookup.

Where can my tuner find the official Injector Dynamics Dead Time data for the ID1300-XDS for tuning a 2JZ-GE Haltech or AEM?

Injector Dynamics provides comprehensive and validated characterization data, including Dead Time (Latency) and Flow vs. Pressure tables (based on ID1300x2) for standalone systems. This data is mandatory for the 2JZ-GE to achieve precise fuel control and cylinder-to-cylinder balance, which is challenging on high-output engines.

Is this injector compatible with the IS300 models that feature the factory Air-Assist intake manifold?

No, be cautious. The 2JZ-GE engine came in both standard and Air-Assist versions. The Air-Assist manifold uses unique injector seats that often require a different injector setup or modifications. This specific injector part number is generally NOT compatible with the factory Air-Assist manifold without modifications or custom seats (consult your installer).