TSX 04-10 | ID1300 | Injector Dynamics | 1300.48.14.14.4-0

TSX 04-10 | ID1300-XDS | Injector Dynamics | 1300.48.14.14.4

Details
Options

ID1300-XDS, for 04-10 TSX / K-series. 14mm (grey) adapter top. Set of 4.

The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the needs of the motorsport tuner. The ID1300 was designed with alternative fuels in mind, and is the only performance injector available with all stainless internals. It is compatible with all known fuels, and will stand up to the corrosive nature of alcohol better than any injector on the market.

While the ID1300 was designed with an eye towards ethanol fueled engines, we have accounted for the occasional need to convert back to gasoline. The ID1300 has a minimum fuel mass compatible with gasoline use, and will provide exceptional idle and cruise behavior under these conditions. In addition to its multi-fuel capabilities, the compact body of the ID1300 allows fitment in 200+ applications, making it the most versatile injector in our lineup. The 1300 has continued to be refined and improved over the years, and the 1300-XDS is the latest and best version to date.

Base Specifications

Nominal Flow Rate – 1340cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 6.0 Bar (87.0 psi)
Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
Electrical Connector – USCAR

Details

Frequently Asked Questions About the TSX 04-10 ID1300-XDS Injectors

What maximum E85 horsepower will the ID1300-XDS set support on a boosted Acura TSX (K24A engine)?

The ID1300-XDS (1335 cc/min at 43.5 psi) is designed for high-boost Honda K-Series applications. This set of 4 provides flow capacity for forced induction E85 setups well into the 600 to 750+ wheel horsepower range, offering maximum margin for turbo or supercharger kits.

Is the 48mm short body length (PN: 1300.48.14.14.4) a direct drop-in replacement for the 04-10 TSX factory fuel rail?

Yes, it is a direct fit. This ID1300-XDS set is configured to the specific short-body 48mm O-ring to O-ring length required for the K24A engine. It installs directly into the fuel rail and manifold bosses without requiring spacers.

Does this USCAR ID1300-XDS set require adapters to connect to the Acura TSX factory harness?

Yes, adapters are required. The ID1300-XDS uses the modern USCAR connector. The factory TSX harness uses a Denso style connector. You will need four USCAR to Denso PNP adapters (ID P/N 90.3) for a clean, non-splicing electrical hookup.

Where can my tuner find the official Injector Dynamics Dead Time data for the ID1300-XDS when tuning the K24A with Hondata?

Injector Dynamics provides validated Dead Time (Latency) and Flow vs. Pressure tables (based on ID1300x2). This data is mandatory for tuning platforms like Hondata K-Pro or FlashPro to ensure the ECU accurately fuels the engine, which is critical for smooth operation across the VTEC range.

How does the ID1300-XDS maintain a smooth idle on a gasoline-fueled TSX despite the large size?

The injector's superior Dual Slope Matching technology guarantees highly linear flow at very low pulse widths. This prevents the large injector from becoming unpredictable at idle, ensuring a stable, near-OEM idle quality with accurate closed-loop fuel trims.