SVT Raptor 2017-2020 | ID2600-XDS | Injector Dynamics | 2600.34.14.14.6
ID2600-XDS, for SVT Raptor 2017-2020. Direct fitment, no adapters. Set of 6.
The ID2600-XDS is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport.
The ID2600-XDS was developed specifically for use with liquid fuels, featuring corrosion resistant internals, and long term compatibility with ethanol and methanol.
The ID2600-XDS has the highest flow rate of any injector offered by Bosch, and flows 50% more than the ID1700x.
The ID2600-XDS benefits from Dual Slope Matching, a method of matching the flow rate in both the linear, and nonlinear operating range, providing better cylinder to cylinder consistency at low pulse widths.
Basic Specifications
- Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)
- Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.
- Fuel Compatibility – Compatible with Methanol/Ethanol/All Known Hydrocarbons. NOT Compatible with Ethers (MTBE, ETBE, TAME) or Nitro Methane
- Electrical Connector – USCAR
Details
What is Dual Slope Matching?
Dual Slope Matching is a method of matching injectors that provides the best possible cylinder to cylinder fueling across the entire operating range.
Traditionally, injectors were matched based on static flow rate alone, which resulted in large deviations at low pulse widths.
Injector Dynamics introduced Slope Intercept Matching over a decade ago, which provided even cylinder to cylinder fueling across the linear operating range of the injector.
With the progression of turbo technology, and increased use of alcohol fuels, greater demands are placed on fuel injectors, and they are often required to deliver fuel well outside of their linear operating range.
The concept of Dual Slope Matching extends the injector matching into the lower non linear operating range. Dual Slope Matching was conceived by Aaron Looft of Injector Dynamics, who was inspired by the dual slope injector characterization model used by Ford.
For additional information about Dual Slope Matching please click HERE
Frequently Asked Questions About the SVT Raptor 2017-2020 ID2600-XDS Injectors
Can the ID2600-XDS injectors support the 3.5L EcoBoost engine in the 2017-2020 SVT Raptor under high-boost or bolt-on upgrades?
Yes. These injectors are designed for the 3.5L twin-turbo EcoBoost V6 in SVT Raptors. They provide precise fueling for stock or moderately tuned builds, handling intake, exhaust, and ECU calibration upgrades while ensuring safe, consistent performance under aggressive driving conditions.
Does the 34mm injector length require spacers or fuel rail modifications?
No, the 34mm short-body injectors are direct-fit. They install under the factory or compatible aftermarket top-feed fuel rails using the supplied top and bottom O-rings, with no need for spacers or extensions.
Where can my tuner access official Injector Dynamics characterization data for ECU tuning?
Injector Dynamics provides fully validated dead-time and pulse width data for the ID2600-XDS injectors on their support site. This data is critical for programming the ECU to maintain accurate fueling during voltage fluctuations, boost changes, and low-RPM operation.
Is this USCAR ID2600-XDS set plug-and-play with the 2017-2020 Raptor factory wiring harness?
Yes. These injectors use USCAR EV14 connectors compatible with the factory EcoBoost harness, allowing a clean, plug-and-play installation with no adapters or splicing required.
How does the ID2600-XDS maintain smooth idle on a stock or lightly tuned SVT Raptor?
The injectors feature Dual Slope Matching to ensure precise low-pulse width consistency. This prevents non-linear behavior at idle, eliminating rough or 'lumpy' idle, even when running gasoline or ethanol blends like E85.
_Related Products
Comments & Reviews
You must be logged in to post a review.
Reviews
There are no reviews yet.